New
Product
- Detachable plate heat exchanger
- Domestic plate heat exchanger seal gasket
- Semi welded plate heat exchanger
- Brazed plate heat exchanger
- Welded plate heat exchanger
- Detachable frame
- Heat recovery / heat exchange unit
- Wire winding hydraulic press
Hot news
Industry news
Precautions for replacement of plate heat exchanger gaskets
The plate heat exchanger gasket replacement is not a very simple matter, usually if the operation method Bu appropriate, there will be plate heat exchanger leakage, string and other issues, today Xiaobian simple to introduce the heat transfer Precautions for the replacement of the gasket.
Each heat exchanger plate coated with fluorescent reagent. Check for fine cracks and corroded holes under UV light. And re-cleaned. In addition. But also focus on checking the case of sealing groove. If necessary, to dress up.
The bonding position and the bonding quality of each plate heat sink were examined. Sorted by installation order. And then carefully assembled the plate heat sinks carefully.
The plate heat exchanger is subjected to chemical cleaning. The chemical medium remaining on the surface of the plate heat exchanger or the like is thoroughly removed by a high-pressure purge device.
Test and testing of reuse performance. Inspect the wall thickness of the heat exchanger and the pipe in the presence of corrosion.
Remove the aged seal on the plate heat exchanger. According to different dirt. Use acid-alkali cleaning pool for chemical cleaning. The surface of the parts to be cleaned is not subject to corrosion by chemical media.
Each heat exchanger plate coated with fluorescent reagent. Check for fine cracks and corroded holes under UV light. And re-cleaned. In addition. But also focus on checking the case of sealing groove. If necessary, to dress up.
The bonding position and the bonding quality of each plate heat sink were examined. Sorted by installation order. And then carefully assembled the plate heat sinks carefully.
The plate heat exchanger is subjected to chemical cleaning. The chemical medium remaining on the surface of the plate heat exchanger or the like is thoroughly removed by a high-pressure purge device.
Test and testing of reuse performance. Inspect the wall thickness of the heat exchanger and the pipe in the presence of corrosion.
Remove the aged seal on the plate heat exchanger. According to different dirt. Use acid-alkali cleaning pool for chemical cleaning. The surface of the parts to be cleaned is not subject to corrosion by chemical media.
Related articles
- Congratulations on our company's quality management system, occupational health management system and environmental management system certification.
- Manufacturing Technology of Rubber Seal Gasket for Plate Heat Exchanger
- Precautions for replacement of plate heat exchanger gaskets
- Fixed method of Heat exchanger gasket
- Temporary Treatment of Aging of Plate Heat Exchanger Gasket
- Detachable plate heat exchanger which parts are formed
- work circumstances of the plate heat exchanger
- The best way to buy plate heat exchanger products
- Temperature and Pressure Requirements for Plate Heat Exchangers
蘇公網(wǎng)安備32028102001776